Thermal Processes

Control Panels for Thermal Processes

WETS AI engineers and builds control panels for thermal processes in Houston, Texas: thermal oxidizers, boilers, process heaters and furnaces, including the burner management systems that keep combustion safe. Each panel is built to UL 508A, programmed in-house and tested before it ships.

What We Build

Thermal Equipment We Control

Thermal equipment combines high temperatures, fuel and air, so the controls have two jobs: run the process efficiently and shut it down safely when something goes wrong.

  • Thermal oxidizers
  • Boilers
  • Process heaters
  • Furnaces and ovens
  • Burner management systems
  • Temperature control loops
  • Combustion air fan VFDs
  • Damper and valve control
Finished custom control panel with Siemens HMI, pushbuttons and beacon
Custom control panel with HMI, pushbuttons and beacon
Combustion Safety

Burner Management Systems

A burner management system (BMS) makes sure a burner can only light, and keep running, when it is safe. It purges the combustion chamber before ignition, proves the pilot and main flame, watches the flame continuously, and closes the fuel safety shutoff valves the moment a safety condition is lost.

We design and build BMS panels to the combustion safety codes that apply to your equipment, and keep the safety logic separate from the normal process control. Every interlock is tested before the panel ships.

  • Pre-ignition purge
  • Pilot and main flame proving
  • Continuous flame supervision
  • Fuel safety shutoff valves
  • Combustion airflow proving
  • Fuel pressure interlocks
  • High temperature and pressure limits
  • First-out alarm indication
BMS Sequence

How a Burner Starts Safely

A burner only lights once every safety condition is proven, and the fuel is shut off the moment one is lost.

  • Interlocks confirm airflow, fuel pressure and limits
  • A timed purge clears the chamber before ignition
  • Pilot and main flame are each proven before the next step
  • Any lost condition closes the fuel safety shutoff valves
Burner management sequence: interlocks proven, combustion chamber purged, pilot lit and proven, main flame lit and proven, then continuous flame supervision while running.
Thermal Oxidizers

Controls for Thermal Oxidizers

A thermal oxidizer has to hold its chamber temperature high enough to destroy the pollutants in the process air, while the process upstream keeps running. The control system manages burner firing, the fan, dampers or valves that bring in process air, and the temperature records operators and permit reviewers ask for.

We agree how the oxidizer should respond to every upset, such as a temperature drop or a fan failure, in the control narrative before building.

System View

What the Oxidizer Panel Controls

The oxidizer panel holds the chamber hot enough to destroy the pollutants, while the burner management system keeps the burner safe.

  • Fan speed sets the airflow through the chamber
  • The burner fires to hold the temperature set point
  • Temperature is recorded for compliance reporting
  • BMS interlocks shut the burner down safely on a fault
Illustration of a thermal oxidizer: a process air fan sends polluted air into a refractory-lined combustion chamber with a burner flame, treated air leaves through the stack, and a control panel with burner management controls the fan, burner and chamber temperature.
Swipe sideways to see the whole diagram
How We Work

Engineering a Thermal Control Panel

01

Review hazards

HAZOP findings and SIL identification set the safety functions.

02

Write the narrative

Start-up, normal running, shutdown and trips are agreed.

03

Build and program

The panel is built to UL 508A and programmed in-house.

04

Test every trip

Each interlock and shutdown is proven at FAT, then again at SAT.

FAQ

Thermal Process Questions

Do you build burner management system panels?

Yes. We design and build BMS panels for boilers, heaters, furnaces and thermal oxidizers, with the safety logic kept separate from the process control.

Which thermal equipment do you build panels for?

Thermal oxidizers, boilers, process heaters and furnaces, including their burner management, temperature control and fan drives.

Are the safety interlocks tested before shipping?

Yes. Every interlock, trip and shutdown is simulated and tested at FAT, and verified again on site at SAT.

Can you work with our burner and equipment supplier?

Yes. We work from the supplier's requirements and agree the control narrative with both of you before building.

Which enclosure types do you build?

Mostly NEMA 1 for clean indoor rooms, NEMA 3R for outdoor sites, NEMA 4 for hose-down areas and NEMA 4X where corrosion is a concern. Tell us where the panel will be installed and we will recommend a rating.

Related

Related Panels & Services

Design & Engineering

Control narratives, HAZOP and SIL identification, process flow diagrams and panel drawings.

Request a Quote

Need a Thermal Process Panel?

Tell us about the equipment and burner. We will review the safety requirements with you and quote the panel.

Call Request a Quote