What to Send for a Panel Quote
The eight things that get you an accurate quote the first time.
The price of an industrial control panel is driven mostly by its components: drives, PLCs, I/O and protection devices. After that come engineering and programming time, the enclosure type and cooling, the short-circuit rating the panel must reach, wiring labor, testing and documentation. Two panels that look similar from the outside can differ a lot in price because of these choices.
Drives, PLCs, HMIs and power distribution parts usually make up the largest share of a panel's cost. Brand, size and quantity all matter: a larger drive, a modular PLC with many I/O cards or a large touchscreen moves the price quickly.
Matching your plant standard is usually the right choice, even if another brand is cheaper on paper. Spare parts, software and training you already have are worth more than a small saving on the panel.

These are the choices we see change panel prices most often.
| Factor | Raises cost | Keeps cost down |
|---|---|---|
| Controller and I/O | Large modular PLC, many I/O cards | Right-sized controller with some spare I/O |
| Drives and starters | Large VFDs, bypass, filters | Starters where speed control is not needed |
| Enclosure | Stainless NEMA 4X, air conditioning | Painted steel indoors, fans where allowed |
| SCCR | High rating needs current-limiting parts | A rating matched to the real site value |
| Engineering | Design from a blank page | Complete drawings supplied |
| Programming | Complex sequences, many screens | Standard templates, clear narrative |
| Testing | Witnessed FAT, extra documents | Standard in-house testing |

The cheapest quote is not always the cheapest panel. A panel without a UL label may need a field evaluation before an inspector will accept it. A panel with an SCCR below the site value may need rework. An untested panel turns site startup into a debugging session.
When comparing quotes, check what is included: drawings, programming, labeling, SCCR calculation, testing and documentation. A clear scope avoids change orders later.
It depends almost entirely on what is inside it. A small pump panel and a large PLC and drive panel can differ many times over. Send us your details and we will quote it.
A little, for the labeling, documentation and checks. It usually saves money on site by avoiding field evaluations and inspection delays.
Sometimes. Talk to us first, because every part must be suitable under UL 508A, and warranty and lead time responsibilities need to be clear.
Usually because the scope differs: brands, SCCR, programming, testing and documentation. Compare the scope line by line.
The eight things that get you an accurate quote the first time.
Questions to ask before you place a control panel order.
Your drawings and bill of materials, built, marked and tested to UL 508A.
Send what you have: drawings, an I/O list or a short description of the process. We will reply with questions, a quotation and a schedule.