Siemens

Siemens Control Panels Built in Houston

WETS AI builds Siemens control panels in Houston, Texas, with SIMATIC S7-1200 or S7-1500 controllers, SIMATIC HMIs and SINAMICS drives. Each panel is built to UL 508A, programmed in TIA Portal by our in-house team when you need it, and tested before it ships.

Components

Siemens Components We Build With

Siemens SIMATIC controllers are widely used in water treatment, process plants and machines built by European OEMs. We build complete Siemens panels, from the controller to the operator screens and drives.

  • SIMATIC S7-1200 controllers
  • SIMATIC S7-1500 controllers
  • ET 200SP remote I/O
  • SIMATIC HMI panels
  • SINAMICS drives
  • PROFINET networks
  • SIRIUS starters and relays
  • Safety relays and controllers
Finished operator panel with Siemens HMI and status pushbuttons
Finished operator panel with Siemens HMI
Architecture

A Typical Siemens System

How the controller, network, HMI, remote I/O and drives fit together in a typical panel we build.

  • S7-1200 or S7-1500 programmed in TIA Portal
  • SIMATIC HMI configured in the same project
  • ET 200SP I/O and SINAMICS drives on PROFINET
  • One project file for controller, HMI and drives
Typical Siemens control system built by WETS AI: SIMATIC S7-1200 or S7-1500 controllers programmed in TIA Portal, connected over PROFINET to SIMATIC HMIs, ET 200SP remote I/O and SINAMICS drives.
Swipe sideways to see the whole diagram
Choosing a Controller

S7-1200 or S7-1500?

Siemens offers two main controller lines for the panels we build.

The choice mostly comes down to system size, speed and how many networks you need.

S7-1200S7-1500
Typical system sizeSmall machines and process unitsMid to large systems
PerformanceCompact and cost-effectiveFaster, more memory and communication options
When it fitsPump stations, small skids, single machinesTreatment plants, process lines, complex sequences
SoftwareTIA PortalTIA Portal

Both controllers are programmed in TIA Portal, so standards and libraries carry across.

Programming

Programmed in TIA Portal

Our team writes and tests Siemens programs and HMI screens in TIA Portal, with consistent tag names and comments that follow your company standard when you have one.

We also move older systems, such as S7-300 and S7-400, onto current S7-1500 controllers, keeping the sequences your operators already know.

Siemens SIMATIC HMI on a finished WETS AI control panel
Siemens SIMATIC HMI on a finished WETS AI panel
FAQ

Siemens Panel Questions

Do you program Siemens PLCs?

Yes. We program S7-1200 and S7-1500 controllers and SIMATIC HMI panels in TIA Portal.

Can you upgrade an S7-300 or S7-400 system?

Yes. We migrate older Siemens systems to S7-1500 and rebuild or modify the panel to suit.

Do you use SINAMICS drives?

Yes. We build VFD panels with SINAMICS drives connected to the controller over PROFINET.

Are you affiliated with these manufacturers?

No. WETS AI is an independent panel builder. We buy components through normal distribution channels and build with the brands our customers specify.

How long does a panel take?

About 16 weeks on average from order to shipment. The real figure depends on panel size and on component lead times, so we confirm a schedule with every quotation.

Related

Related Panels & Services

PLC & HMI Programming

Programs written in-house for Allen-Bradley, Siemens and Schneider Electric, tested at FAT.

Request a Quote

Need a Siemens Panel?

Send your drawings or I/O list and preferred controller. We will quote the panel and the programming.

Call Request a Quote