Guide

How to Choose a Control Panel Shop

Choose a control panel shop on evidence, not adjectives. Check that it builds to UL 508A, can show you its testing and documentation, has engineers and programmers in-house if you need them, works with your preferred brands, gives realistic lead times, and answers technical questions clearly before you order.

The Questions

12 Questions to Ask Before You Order

Ask every shop the same questions, and compare the answers side by side.

Standards and quality

  • Do you build to UL 508A, and can you label our panel?
  • How is SCCR worked out for our site?
  • What tests are done on every panel?
  • Can we witness a FAT?

Capability

  • Can you engineer the panel, or only build to print?
  • Is PLC and HMI programming done in-house?
  • Which PLC brands do you work with?
  • Which enclosure types do you build?

Delivery

  • What is a realistic lead time?
  • Which parts drive the schedule?
  • What documents come with the panel?
  • Who is my contact during the build?
Look for Evidence

Ask to See, Not Just Hear

Any shop can say it builds quality panels. Ask to see a sample nameplate, a test record and a set of as-built drawings. Visit the shop if you can. Tidy wire duct, consistent wire marking and a clear test area tell you more than a brochure.

Notice how questions are handled while quoting. A shop that asks about your fault current, enclosure location and I/O list before pricing is a shop that will ask the right questions during the build.

Hand selecting a glowing checkmark representing quality standards
Inspecting a finished panel against the drawings
Warning Signs

Red Flags When Comparing Quotes

A quote that looks cheaper may leave out something you will pay for later.

Red flagWhat it can mean
No mention of SCCRThe rating may not match your site.
Testing not describedThe panel may ship untested.
No drawings or documents listedYou may not get as-builts or manuals.
Programming excluded but assumedSomeone else must write and test the code.
Lead time far shorter than othersLong-lead parts may not have been checked.
Finished operator panel with Siemens HMI and status pushbuttons
Finished WETS AI panel with HMI
About Us

How WETS AI Answers These Questions

We build to UL 508A in our Houston shop, with engineering led by a Texas-licensed Professional Engineer. PLC and HMI programming is done in-house for Allen-Bradley, Siemens and Schneider Electric. Every panel passes 13 checks, witnessed FAT is available on request, and we support SAT on site.

Our average lead time is about 16 weeks, and every quote comes with its own schedule.

FAQ

Common Questions

Should I choose a local panel shop?

Being close helps for witnessed FAT and site support, but capability matters more. Many shops ship across the country.

Is it better to use the same company for programming and the panel?

Often, yes. One team owns both the wiring and the program, so FAT tests everything together and there is one point of contact.

What is build-to-print?

The panel shop builds exactly to your drawings and parts list, and returns any questions or changes to you as redlines.

How long does a panel take?

About 16 weeks on average from order to shipment. The real figure depends on panel size and on component lead times, so we confirm a schedule with every quotation.

Related

Related Guides & Services

UL 508A Control Panels

What the UL 508A label covers, how SCCR is set, and what we check before a panel is labeled.

Request a Quote

Ready for a Quote?

Send what you have: drawings, an I/O list or a short description of the process. We will reply with questions, a quotation and a schedule.

Call Request a Quote