Guide

NEMA 1, 3R, 4 and 4X Enclosures: Which Do You Need?

Choose the enclosure by where the panel will live. NEMA 1 suits clean, dry indoor rooms. NEMA 3R is for outdoor sites with rain, sleet and ice. NEMA 4 adds protection against windblown dust and hose-directed water. NEMA 4X is Type 4 plus corrosion resistance, usually stainless steel or non-metallic, for wet or chemical areas.

At a Glance

The Four Enclosure Types We Build Most

Most of the panels we build use one of these four types. Each step up adds protection, and cost.

  • NEMA 1: indoor, protection from contact and falling dirt
  • NEMA 3R: outdoor, rain, sleet and ice
  • NEMA 4: hose-down, splashing water, windblown dust
  • NEMA 4X: everything in Type 4, plus corrosion
Illustration of four wall-mounted control panel enclosures: NEMA 1 inside a building for clean, dry rooms; NEMA 3R with a drip hood in the rain for outdoor sites; NEMA 4 with a gasketed door being sprayed by a hose; and NEMA 4X in stainless steel with a gasketed door next to a chemical drum, for wet and corrosive areas.
Swipe sideways to see the whole diagram
Compare

NEMA 1 vs 3R vs 4 vs 4X

The table shows what each type is built to resist. If a location calls for more than one, choose the type that covers all of them.

NEMA 1NEMA 3RNEMA 4NEMA 4X
Indoor useYesYesYesYes
Outdoor useNoYesYesYes
Falling dirtYesYesYesYes
Rain, sleet, snowNoYesYesYes
Windblown dustNoNoYesYes
Hose-directed waterNoNoYesYes
Corrosion resistanceNoNoNoYes
Typical materialPainted steelPainted steelPainted steelStainless or non-metallic
Water treatment facility with filter vessels controlled by WETS AI panels
Outdoor treatment plant where NEMA 3R and 4X enclosures are common
Where Each Fits

Matching the Enclosure to the Site

Electrical rooms and clean control rooms usually only need NEMA 1. Outdoor pump stations and skids on Texas sites usually need NEMA 3R as a minimum, and NEMA 4 where equipment is washed down or exposed to blowing dust.

Water treatment plants, chemical feed areas and coastal sites often call for NEMA 4X, because chlorine, caustic and salt air attack painted steel. Stainless steel or a non-metallic enclosure lasts far longer in those places.

  • Electrical room: NEMA 1
  • Outdoor pump station: NEMA 3R or 4
  • Wash-down area: NEMA 4
  • Chemical feed room: NEMA 4X
  • Coastal or salt air: NEMA 4X
  • Hot sun: plan for cooling
Do Not Forget

Heat, Sun and Openings

Sealing a panel to NEMA 4 or 4X keeps water out, but it also keeps heat in. Drives and power supplies may need an air-to-air heat exchanger or an enclosure air conditioner instead of filter fans, because fans and vents would break the seal.

Every hole for an HMI, a pushbutton or a cable entry must keep the enclosure's rating. We use operators, glands and fittings rated for the same type as the enclosure, so the panel is still NEMA 4 or 4X once it is fitted out.

Finished operator panel with Siemens HMI and status pushbuttons
Sealed panel door with HMI and pushbuttons
FAQ

Common Questions

What is the difference between NEMA 4 and NEMA 4X?

NEMA 4X has all the protection of NEMA 4 against hose-directed water, windblown dust and rain, plus resistance to corrosion. It is usually stainless steel or non-metallic.

Can a NEMA 1 enclosure be used outdoors?

No. NEMA 1 is for indoor use only. Outdoor panels need at least NEMA 3R.

Is NEMA 3R waterproof?

No. It keeps out falling rain, sleet and snow, but it is not built for hose-directed water. Use NEMA 4 or 4X where panels are hosed down.

Do NEMA ratings cover hazardous locations?

No. The types in this guide are for general-purpose locations. Hazardous locations need different enclosures and equipment.

Which enclosure types do you build?

Mostly NEMA 1 for clean indoor rooms, NEMA 3R for outdoor sites, NEMA 4 for hose-down areas and NEMA 4X where corrosion is a concern. Tell us where the panel will be installed and we will recommend a rating.

Related

Related Guides & Services

Request a Quote

Ready for a Quote?

Send what you have: drawings, an I/O list or a short description of the process. We will reply with questions, a quotation and a schedule.

Call Request a Quote