Oil & Gas

Oil & Gas Control Panels Built in Houston

WETS AI builds control panels for oil and gas operators and equipment builders from our Houston, Texas shop. We engineer and build panels for skids, compressors, pumps and tank systems to UL 508A, in enclosures suited to outdoor Texas sites, and test every panel before it ships.

What We Build

Panels for Oil and Gas Equipment

Oil and gas equipment often runs at remote sites with little supervision, in heat, dust and humidity. The control panel has to keep running, report problems clearly, and be easy for a field technician to work on.

  • Skid control panels
  • Compressor control panels
  • Pump control panels
  • Tank level and transfer control
  • VFD and motor control
  • Remote monitoring and telemetry
  • Shutdown and alarm systems
  • Outdoor NEMA 3R, 4 and 4X enclosures
Custom control panel with Weintek HMI, meters and motor protection
Control panel with HMI, meters and motor protection
System View

Where the Panel Sits on a Skid Project

The process equipment sits inside the classified area. The control panel sits outside it, in a general-purpose area, wired to the skid.

  • Separator level and pressure are monitored and controlled
  • Compressor start, stop and shutdown logic runs in the PLC
  • The panel is built for a general-purpose location
  • Remote monitoring gives operators live status and alarms
Illustration of an oil and gas skid: inlet flow passes through a separator vessel and a motor-driven compressor on a common skid base, then to the pipeline. The skid control panel sits outside the classified area boundary and reports to a remote monitoring workstation.
Swipe sideways to see the whole diagram
Panel Location

Planning for Classified Areas

Many oil and gas sites have areas classified for flammable gas. Our UL 508A panels are built for general-purpose (unclassified) locations, such as control buildings or outdoor areas outside the classified zone, with field wiring running out to the equipment.

Tell us the area classification and panel location at the start, so the layout and field wiring are planned correctly.

Built for the Field

Details Field Crews Appreciate

Outdoor panels in Texas face heat, sun, rain and dust, so we size cooling for the site and choose enclosures to match. Every wire is marked to the drawings, so a technician on site can trace a circuit without guessing.

Alarm and shutdown causes are shown clearly on the HMI, with first-out indication where it helps the crew find the root cause quickly.

New treatment site under construction, ready for WETS AI control panels
New site under construction, ready for control panels
How We Work

From Spec to Site

01

Review

Specification, area classification and site conditions are reviewed.

02

Design

Drawings and control narrative are prepared or reviewed.

03

Build and test

The panel is built to UL 508A and proven at FAT.

04

Commission

The system is verified on site at SAT.

FAQ

Oil and Gas Panel Questions

What oil and gas equipment do you build panels for?

Skids, compressors, pumps and tank systems, including their motor control, VFDs, alarms and shutdowns.

Where are your panels installed in hazardous areas?

Our UL 508A panels are built for installation in general-purpose (unclassified) locations, such as control rooms, MCC rooms and outdoor areas outside the classified zone. Tell us the area classification early so the panel location and field wiring are planned correctly.

Can the panel report to our remote monitoring system?

Yes. We set up PLC communications or alarm outputs for your SCADA or telemetry system.

Do you build panels for skid builders?

Yes. We build repeat panels for equipment builders, each built from the same released drawings.

Which enclosure types do you build?

Mostly NEMA 1 for clean indoor rooms, NEMA 3R for outdoor sites, NEMA 4 for hose-down areas and NEMA 4X where corrosion is a concern. Tell us where the panel will be installed and we will recommend a rating.

Related

Related Panels & Services

Panels for OEMs

The same panel, built the same way, for every machine you ship.

Request a Quote

Need an Oil and Gas Control Panel?

Send the specification and site details. We will review them and quote the panel and schedule.

Call Request a Quote